| L1 Hall: A Wednesday 9:00-9:20 |
| Joule-heated reactor structures for the electrification of direct air capture |
| Jeroen Weijts, Dorian Péty, Liangyuan Wei, Matteo Gazzani, Martin van Sint Annaland |
| L2 Hall: A Wednesday 9:20-9:40 |
| Inductively self-heating Fe(Co, Cu) catalysts for reverse water gas shift: evidence of temperature gradients at the nanoscale |
| Stylianos Spyroglou, Lorenz Lindenthal, Thomas Cotter, Christoph Rameshan, Maricruz Sanchez-Sanchez |
| L3 Hall: A Wednesday 9:40-10:00 |
| A Multifunctional CombiSonoPlasma® Reactor for Simultaneous Treatment of Oil-Contaminated Hypersaline Produced Water and Hydrogen Production |
| Sergii Bespalko*, Rayyan Al Azri, Ahmed Hussain Mohamed Redha,Najah Al Mhanna, Justyna Markiewicz, Rafał Majzer, Oleksii Halychyi,Marcin Siedlecki |
| L4 Hall: A Wednesday 10:00-10:20 |
| Heating the Catalyst, Not the Planet: Magnetic Induction as a Platform for Electrified CO₂ and NH₃ Valorisation |
| A. Sedminek, S. Girshevich, A. Blažič, E. Sutormina, M. Huš, A. Prašnikar, M. Grilc, Ž. Kovačič, D. Bajec, D. Makovec, S. Gyergyek, B. Likozar, S. Yakushkin, J. Teržan |
| L5 Hall: B Wednesday 9:00-9:20 |
| Thermo-responsive Catalysts for PET Glycolysis: High-Throughput Design Towards Circular Recycling. |
| K. F. Batchelor, S. T. G. Street, J. Sutton, S. J. Baker, O. Young, A. P. Dove*, and J. Wood*. |
| L6 Hall: B Wednesday 9:20-9:40 |
| No coke, no problem: theoretical perspective on how visible light prevents carbon accumulation during DRM on nickel-ceria catalysts |
| Kristijan Lorber, Vasyl Shvalya, Damjan Vengust, Janez Zavašnik, Matjaž Mazaj, Blaž Likozar, Petar Djinović, Matej Huš |
| L7 Hall: B Wednesday 9:40-10:00 |
| Ru/C Catalysts on 3D-Printed α-Al₂O₃ Supports for Lignin Reductive Depolymerization |
| Uswa Shahid, German Araujo Barahona, Sanja Vucetic, Jaswinder Kaur, Dumindu P. Wadu, Kari Eränen, Oskar Beckman, Chunlin Xu, Patrik Eklund, Tapio Salmi, Henrik Grenman, Lilia Longo |
| L8 Hall: B Wednesday 10:00-10:20 |
| Electrification of endothermic fixed-bed catalytic reactors: multiphysics computational modeling of a Joule-heated fixed-bed reactor, experimental validation and Joule-heating design optimization |
| Yacine Haroun, Igor Garcia |
| L9 Hall: A Wednesday 14:00-14:20 |
| Engineering biochar catalysts for plastic pyrolysis via a cold plasma treatment |
| Evgeny Rebrov, Kahon Fung, Sirui Li, Wong Syie Luing |
| L10 Hall: A Wednesday 14:20-14:40 |
| EMERALD: A Novel Radial-Current Electrified Reactor for the Intensification of SMR. Modeling and Experimental Validation. |
| Federica Romanelli, Luca Cozzarolo, Francesco Poma, Matteo Ambrosetti, Mauro Bracconi, Matteo Maestri, Alessandra Beretta, Gianpiero Groppi, Bruna Mello-Gabbrielleschi, Bryce Williams, Enrico Tronconi |
| L11 Hall: A Wednesday 14:40-15:00 |
| Process electrification by innovative electro-thermal fluidized bed reactor |
| Miha Grilc, Igor Shlyapnikov, Klaus Jacobs, Jeroen Lauwaert, Joris W. Thybaut, Blaž Likozar |
| L12 Hall: A Wednesday 15:00-15:20 |
| Continuous conversion of water into hydrogen peroxide in a flexible microwave plasma reactor. Concept and progress |
| Mery Sheryll Hernandez, Yannis Mikolaiczyk, Sergey Soldatov, Guido Link, Lucas Silberer, Roland Dittmeyer, Alexander Navarrete |
| L13 Hall: A Wednesday 15:20-15:40 |
| CO₂-Free Hydrogen and Syngas Production from Methane Pyrolysis Using Electrothermal Fluidized Bed Technology |
| Soroush Zareghorbaei, Klaus Jacobs, Iliyas Melnikov, Jeroen Lauwaert, Andrei Khodakov, Joris W. Thybaut |
| L14 Hall: A Wednesday 15:40-16:00 |
| Intensification of the low-temperature RWGS activity of copper ceria catalysts enabled by visible light |
| Miha Okorn, Kristijan Lorber, Matjaž Mazaj, Nataša Novak Tušar, Petar Djinović |
| L15 Hall: B Wednesday 14:00-14:20 |
| Low-temperature CO oxidation over MnOx catalysts synthesized via a CO2-assisted solvothermal route |
| Nadia Grifasi, Hefei Sun, Franck Launay, Sandra Casale, Antoine Miche, Enrico Sartoretti, Samir Bensaid, Nunzio Russo, Debora Fino, Marco Piumetti |
| L16 Hall: B Wednesday 14:20-14:40 |
| Structure–Acidity–Activity Relationships in Multifunctional Fe–Ni Catalysts for Jet-Range Hydrocarbon Production from Model Compound n-Hexadecane |
| Nikita Šarkov, Mohideen Aliyar Jafeer Shanavas, Irina L. Simakova, Oryna Shevchuk, Olha Yevdokimova, Päivi Mäki-Arvela, Dmitry Yu. Murzin |
| L17 Hall: B Wednesday 14:40-15:00 |
| One-pot synthesis of epoxides from hydrogen, oxygen and alkenes -A way to process intensification? |
| Christoph Schmidt, Matias Alvear, Francesco Sandri, Seo Mandon, Alice Vidrequin, Jeremy Favier, Tiina Laitinen, Satu Ojala, Kari Eränen, Tapio Salmi |
| L18 Hall: B Wednesday 15:00-15:20 |
| Copper Phthalocyanines as Precursors for Direct Oxidation of Methane to Methanol in Liquid Phase |
| Luis A. Gallego-Villada, Sebastian Pätsch, Päivi Mäki-Arvela, Alexander Efimov, Dmitry E. Doronkin, Pasi Virtanen, Narendra Kumar, Dmitry Yu. Murzin |
| L19 Hall: B Wednesday 15:20-15:40 |
| Laser–driven synthesis of advanced carbon–based catalysts from aerosolized organic precursors |
| Ekaterina Pakrieva, Javier Hernandez-Ferrer, Ana Rueda-Flores, Javier Bonet–Aleta, Francisco Balas, Enrique García-Bordeje, Alejandro Anson-Casaos, Ana M. Benito, Wolfgang K. Maser, Jose L. Hueso |
| L20 Hall: B Wednesday 15:40-16:00 |
| New structured catalysts for production of sugar alcohols: from experiments to modelling, from batch to continuous operation |
| Tapio Salmi, Luca Mastroianni, German Araujo Barahona, Carl Brunberg |
| L21 Hall: A Wednesday 16:20-16:40 |
| Magnetically Induced Iron-Catalyzed Hydrodeoxygenation of Benzylic Esters and Polyesters |
| Sihana Ahmedi, Lise-Marie Lacroix, Derya Demirbas, Daniel J. SantaLucia, Claudia Weidenthaler, Walid Hetaba, Walter Leitner, Alexis Bordet* |
| L22 Hall: A Wednesday 16:40-17:00 |
| Catalytic reverse water gas shift reaction assisted by an electric field over cerium- and zirconium-based materials |
| Amal Belhcen, Bart D. Vandegehuchte2, Rania Djettene, Catherine Batiot-Dupeyrat |
| L23 Hall: B Wednesday 16:20-16:40 |
| On the induction period of propylene formation from methanol over ZSM-5 catalysts |
| Toyin Omojola, Alexander J. O'Malley, Andre C. van Veen, Gregory Yablonsky |
| L24 Hall: B Wednesday 16:40-17:00 |
| Human-in-the-Loop LLM-Assisted Catalyst Design for CO₂-to-DME Conversion: From Hypothesis Generation to Experimental Validation |
| W. Korir¹, A. Aho¹, P. Mäki-Arvela¹, E. Yu. Mourzine² D. Yu. Murzin¹ |
| L25 Hall: A Thursday 8:00-8:20 |
| Liquid Metal Based Bubble Column Reactor Solving Coking Issues for High ReactionTemperatures |
| Marie D. Gutsch, Benjamin Dietrich, Ralf Krumholz, Leonid Stoppel, Thomas Wetzel |
| L26 Hall: A Thursday 8:20-8:40 |
| Enhanced methanol synthesis by sorbent circulation |
| Chiara Berretta, Lukas Schlagenhauf, Farzaneh Talebkeikhah, Chiara Pischetola, Tilman Schildhauer |
| L27 Hall: A Thursday 8:40-9:00 |
| A Computationally Efficient 2D Pseudo-Homogeneous Reactor Model for Evaluating Operational Strategies in Exothermic Packed-bed Reactors |
| Russel A. S., Wout Callewaert, Joris W. Thybaut |
| L28 Hall: A Thursday 9:00-9:20 |
| Prototype reactors and their viability for sorption-enhanced processes: continuous sorbent flux fluidized bed reactors (CSFFBR) |
| Simona Renda, Mario Leclercq, Jaime Soler, Javier Herguido, Miguel Menéndez |
| L29 Hall: B Thursday 8:00-8:20 |
| Selective hydroformylation of styrene over rhodium supported on layered and exfoliated transition metal dichalcogenides |
| Martina Pitínová, Ayesha Shafiq, Iryna Danylo, Michaela Hlinková, Lukáš Koláčný, Martin Veselý |
| L30 Hall: B Thursday 8:20-8:40 |
| Hydrogen rich reduction of iron oxides for sustainable steel production– experimental study and mechanistic analysis |
| D’Angelo |
| L31 Hall: B Thursday 8:40-9:00 |
| Bridging homogeneous and heterogeneous catalysis: grafted ionic liquids for the selective CO2 conversion into limonene-based cyclic carbonates |
| Federica Orabona, Wander Perez-Sena, Kari Eränen, Martino Di Serio, Dmitry Yu. Murzin, Vincenzo Russo, Tapio Salmi |
| L32 Hall: B Thursday 9:00-9:20 |
| Biomembranes for the combined separation and enzymatic treatment of microplastic samples |
| Agata Zdarta*, Zofia Bukowska, Guoqiang Li, Jakub Zdarta, Agnieszka Rybarczyk, Teofil Jesionowski, Ewa Kaczorek |
| L33 Hall: A Thursday 11:20-11:40 |
| Process intensification in an Elastic Foam-bed Reactor: hydrodynamics, mass transfer and modeling |
| Laura Tricas, Pascal Fongarland, Régis Philippe and David Edouard |
| L34 Hall: A Thursday 11:40-12:00 |
| Sensitivity and Non-Uniqueness in Determining Enzyme Kinetic Parameters |
| Igor Plazl, Mitja Lakner |
| L35 Hall: A Thursday 12:00-12:20 |
| Experimental and CFD study of metallic foam and monolith structure as catalyst supports for the selective hydrogenation of acetylene |
| Yacine Haroun, Céline Pagis |
| L36 Hall: A Thursday 12:20-12:40 |
| Direct Ink Writing (DIW) of shaped catalysts for multiscale transport optimization |
| Yoran De Vos, Luca Mastroianni, Jurjen Cazemier, Arturo Pajares, Linsey Garcia-Gonzalez |
| L37 Hall: A Friday 12:40-13:00 |
| Sorption enhanced CO2 methanation to obtain high purity methane |
| Enrico Marchi*, Salvatore Capasso, Pablo Gangotena, Christian Firlund, Pekka Simell, Tapio Salmi, Henrik Grénman. |
| L38 Hall: B Thursday 11:20-11:40 |
| Process-driven insights into LDH inhibition for next-generation enzyme-based anticancer screening |
| Chiara Vincenzi, Carminna Ottone, Valentina Cauda, Debora Fino, Marco Piumetti |
| L39 Hall: B Thursday 11:40-12:00 |
| Ozonation and heterogeneous catalysis in the destruction of pharmaceutical mixtures |
| Tolvanen |
| L40 Hall: B Thursday 12:00-12:20 |
| Catalytic wet oxidation treatment process for reduction of COD, phenol, and cyanide in coking wastewater |
| Parmesh Kumar Chaudhari |
| L41 Hall: B Thursday 12:20-12:40 |
| Esterification of acrylic acid using a catalyst prepared from waste bone- Catalyst characterization and Influence of operating parameters on yield |
| Amit Keshav |
| L42 Hall: B Thursday 12:40-13:00 |
| Kinetic assessment of reductive depolymerization of hydrolysis lignin on a Pd catalyst |
| Lucas I. Garbarino, Matteo Deroma, Jeriffa De Clerqc, An Verberckmoes, Jeroen Lauwaert, Joris W. Thybaut |
| L43 Hall: A Friday 8:00-8:20 |
| Application of Defect-Engineered Metal–Organic Frameworks for Aldol Condensation toward Aviation Fuel Precursors Synthesis |
| Olha V. Yevdokimova, Päivi Mäki-Arvela, Kari Eränen, Pasi Virtanen, Irina L. Simakova, Vitaly L. Sushkevich, Dmitry Yu. Murzin |
| L44 Hall: A Friday 8:20-8:40 |
| Electrocatalytic Hydrodeoxygenation of Aldehydes in Pd@CNT-stabilized Pickering Emulsions. |
| Edwin Onoh, Prof. Dr. Walter Leitner, Dr. Nicolas Kaeffer, Dr. Alexis Bordet |
| L45 Hall: A Friday 8:40-9:00 |
| Catalytic oxidation of methane in a Fecralloy foam-packed fixed-bed reactor |
| Mateusz Korpyś, Joanna Profic-Paczkowska, Maciej Sitarz, Anna Gancarczyk |
| L46 Hall: A Friday 9:00-9:20 |
| An Experimental Methodology for Bubble Diameter Estimation in a Gas-Inducing Reactor: Application to CO₂ Cycloaddition of Bio-Based Epoxides |
| Wander Y. Perez-Sena, Federica Orabona, Ibrahima Diallo, Andres Barreiro, Kari Eränen, Vicenzo Russo, Tapio Salmi |
| L47 Hall: B Friday 8:00-8:20 |
| Modeling of complete recycling arabinose oxidation |
| Mouad Hachhach, Dmitry Murzin, Tapio Salmi |
| L48 Hall: B Friday 8:20-8:40 |
| Newly Designed Reactor Inserts for Catalytic Hydrodeoxygenation of Biomass Pyrolysis Oil Model Compounds in a Continuous Slurry Reactor |
| Rui Pedro da Cruz, Alexander Søgaard, Magnus Zingler Stummann, Martin Høj, Anker Degn Jensen |
| L49 Hall: B Friday 8:40-9:00 |
| Use of 3D-printed CSTRs in the ketalization of ethyl levulinate with glycerol |
| Vincenzo Russo*, Francesco Taddeo, Luca Mastroianni, Riccardo Tesser, Georgios Gkogkos, Asterios Gavriilidis, Martino Di Serio |
| L50 Hall: B Friday 9:00-9:20 |
| Rotating Packed Bed with Enzyme Coated Packing for CO2 Capture and Conversion |
| Jonathan Lee, Phil Chen, James Hendry |
| L51 Hall: A Friday 14:00-14:20 |
| Plasma-Assisted Desorption in CO2 Capture: A Dual-Functional Material Approach |
| Pranav Arun, Huub Van Den Bogaard, Adarsh Patil, Ludovica Villantieri, Pierdomenico Biasi, Fausto Gallucci, Sirui Li |
| L52 Hall: A Friday 14:20-14:40 |
| Microwave-assisted dry reforming of methane for CO2 valorization in structured monoliths coated with LaNiO3 perovskites |
| Patricia Alias-Lapasauskaite, Lola Azancot, Laura Florentino, Felipe Perañanda-Foix, Pedro J. Plaza-Gonzalez, Jose M. Catala-Civera, Jose L. Hueso, Reyes Mallada |
| L53 Hall: A Friday 14:40-15:00 |
| Tailored reactor concept for electrified induction heating: Enhancing reactor performance through heat-integration and additively manufactured metallic structures |
| Thomas Kieble, Gregor Wehinger |
| L54 Hall: B Friday 14:00-14:20 |
| Parametric optimization and kinetic analysis of CO2 hydrogenation in SOEC: A step further towards power to X |
| Erum Pervaiz, Ronny Monnig, Kevin Van Geem |
| L55 Hall: B Friday 14:20-14:40 |
| Modelling of carbon dioxide methanation in radial flow reactor |
| Salvatore Capasso, Vincenzo Russo, Henrik Grénman |
| L56 Hall: B Friday 14:40-15:00 |
| Regeneration of iron-molybdate catalyst for methanol to formaldehyde reaction: molybdenum recovery and circular economy |
| Giorgia Ferraro, Nicola Ballarini, Michela Signoretto |
| L57 Hall: A Friday 15:00-15:20 |
| 3D printed structures for photo- and electro-chemical applications |
| Alessio Massaro, Christian Stevens, Vesna Middelkoop |
| L58 Hall: A Friday 15:20-15:40 |
| Catalytic micro-monolith reactor for continuous selective oxidation of methane |
| Jialin Yu, Olukayode Gideon. Oloyede, Kang. Li, David Chadwick |
| L59 Hall: A Friday 15:40-16:00 |
| Rocket science: 3D printed green thrusters for hydrogen peroxide decomposition |
| Mastroianni |
| L60 Hall: B Friday 15:00-15:20 |
| Investigation of additive-manufactured catalysts in the decomposition of hydrogen peroxide |
| Sebastian Wilmes, Olaf Hinrichsen |
| L61 Hall: B Friday 15:20-15:40 |
| Nano-whisker-functionalized SiC foams coated with structured CuO/ZnO/Al2O3 catalysts for efficient CO2 hydrogenation to methanol |
| Rui Hu, Huanhao Chen, Yilai Jiao, Xiaolei Fan, Xiaoxia Ou |
| L62 Hall: B Friday 15:40-16:00 |
| Additive Manufacturing of Fe catalysts by Direct Ink Writing and their application in plasma-catalytic NH3 decomposition |
| Weronika Bulejak, Jakub Borowicz, Weronika Góral, Małgorzata Lemańska, Hubert Ronduda, Michał Młotek, Wioletta Raróg-Pilecka |
